Yeti Communications Ltd (Est 2005) is a New Zealand and Indonesian based company
ALL PRICES ON THIS SITE ARE IN US DOLLARS
INTERNATIONAL CUSTOMERS WELCOME PLEASE EMAIL FOR INTERNATIONAL PRICES IN US $ INCLUDING SHIPPING
NEW ZEALAND AND INDONESIAN CUSTOMERS PLEASE EMAIL FOR PRICES IN NZ$ OR IDR
MULTI-MODE 10 METER / EXPORT RADIOS
ANTENNAS AND ACCESSORIES
HOW TO CONTACT YETICOM
Counting Since 1/1/06
Yeticom Optima MKIII Mobile
10/12 Meter Mobile Transceiver
24.500-29.999 Mhz coverage
$250USD IN STOCK
Yeticom Optima 10/12 Meter Dual band 50 Watt Mobile
Designed in mid 2009 By David and Mike along with the engineers and marketed later that year by David and Mike of Yeti Communications Ltd (NZ) designed by Amateur operators for the dx market with some new ideas and alot of thought in to functionality .The optima had several revisions along the way some to do with improvements some to do with changes in production these are out lined
It is 2016 now and we felt the optima has run its course so are moving on to other projects .As always if you didnt buy the Yeticom Optima off Yeticomnz.com it is not a Yeticom Optima but just a base model from the factory ,Only Optima's sold directly from Yeticom had updates included at time of sale as performed by Mike in NZ .
Below is the original write up of the features the transceiver has which many sites have copied over the years .
New and exclusive to yeticomnz.com is the yeticom optima. Fully redesigned and improved on with new coverage ..cooling...steps....filter stages...rf final stage shielding...designed by New Zealanders and made in Hong Kong to meet the demands of the modern day ham radio operator .
Firstly the frequency coverage. This is available in four different configurations:
1:: New Zealand 40 cb radio channels only. No spilt offset 26.330-26.770 inclusive channel or freq display
2::USA/Australian 40 cb radio channels only. No spilt offset 26.965-27.405 inclusive channel or freq display
3:: 12 meter and 10 meter bands only (24.500-25.000/28.000-29.999 split available frequency display only
4:: 24.500-29.999 split available frequency display only (export mode radio is supplied in this mode normally)
Full use of the repeater spilt function is available on all bands (12/10meter or export modes only) at any time unlike pervious versions.
We have added a extra frequency tuning step the radio now defaults to 5khz stepping on power up to move around the bands faster of course stepping in 1/5/10/100khz steps can still be changed at any time. also we have redesigned the software so stepping has flow stepping just like the more expensive rigs...no more need of going back into the "function/call" to step up into the next band. like we said no gaps no jumps.
The transceiver has extra shielding in the RF driver/final stages added to comply with international regulations and type approval
Fm mode now has per and de-emphasis in the audio chain for far better fm mode operation for the European market
The receive has a new design to remove imaging problems pervious models had. Also we had had the manufacturer improve the I.F filter and I.F filter stages for lower I.F noise ..another thing pervious models suffered from.
Extra cooling has been provided for the hotter climates ..the cooling is provided by a time delayed off ptt controlled fan on the heat sink.
The mother board is a completely new design
What's in this package?
Manufactor: Good Will Telecom China for Yeticomnz.com
Please follow this link to our shipping questions page SHIPPING
Official World-wide agent for Yeticom Optima and Yeticom Huracan
Official Indonesia and New Zealand distributor for
Some of our friends on the net
Proud supporters of the following forums and D.X Groups
Our Facebook pages
It is a requirement by law that all New Zealand purchasers of Amateur Radio transceivers and Linear amplifiers MUST
provide proof of Amateur radio Licence under the terms of the Amateur radio G.U.R.L at http://www.rsm.govt.nz
This site is © Copyright www.yeticomnz.com 2005-2017, All Rights Reserved.